4 tips for using a konjac sponge

Q1: Why does the Konjac facial cleanser not work well and the foam disappears when applied to the face?

1. After the konjac sponge is fully foamed, it cannot be completely squeezed dry. You should add an appropriate amount of cleansing or bath products under the condition of sufficient water absorption. Most facial cleansers or bath products on the market require sufficient moisture to lather, and dry rubbing is impossible.
2. When adding cleansing or bath products to the konjac sponge, use both hands to gently smear the surface, do not rub and squeeze hard. The pores of konjac cleansing flour are very fine, and when you rub it lightly, it will form fine micro-bubbles, which are more conducive to deep cleaning. Besides, the konjac sponge has a strong adsorption force. When rubbing and squeezing it hard, the rubbed foam will be sucked back into the depth of the sponge, reducing the amount of foaming, which is not conducive to facial cleaning. In order to generate a large amount of lather, increasing the amount of cleanser or bath product is wasteful.
3. Konjac sponge has good adsorption and can absorb excess oil and dirt on the skin. The foam on the face will be absorbed into the sponge along with the removed oil and dirt, so there will not be a lot of foam on the surface of the skin during the cleaning process.

Q2: How to clean the konjac sponge?

1. When the konjac sponge is used for the first time without any cleansing or bath products, but only with water, the water squeezed out by the cleansing puff will have a small amount of foam, a certain gelatinous stickiness, and slight turbidity, which is a moisturizing skin care factor – Glucomannan is released in the process, people have the illusion of “unclean”, but this is normal.
2. Cleansing and bathing products should be taken in moderation. The pores of the konjac sponge are fine, and fine micro-bubbles can be created by gently smearing and rubbing with cleansing or bathing products, so do not use excessive cleansing or bathing products in order to pursue the amount of foam.
3. To ensure the softness and elasticity of the konjac cleansing puff, the konjac cleansing puff has a certain thickness, and it needs to be washed with flowing water in one direction. For example, hemispherical, rinse the plane with clean water, squeeze from both sides, and let the water and the foam mixed with oil flow out from the arc surface. The two sides are exchanged and rinsed back and forth.

Q3: How to soak a konjac sponge?

1. The konjac sponge should be soaked in water for 3 minutes for the first use, and 1 minute for the second use. It needs to be used frequently. If it is not used for a long time, the air-dried impurities will coagulate into lumps, which will reduce the water absorption rate of the konjac sponge.
2. The soaking time is related to the season, and the plant fiber is also suitable for the principle of thermal expansion and contraction. In summer, the temperature is high, and the konjac facial cleanser dries quickly, but the temperature of the tap water is high. You can directly soak the konjac sponge with tap water for 30 seconds to 1 minute every day, and rub it to help absorb water and restore softness; in winter, the weather is dry and cold, it is recommended to soak the konjac sponge in warm water for 1-2 minutes.
3. Konjac sponge has a foaming process, which needs to be fully foamed and fully recovered before use.

Q4: Konjac konjac with lanyard, will it affect the feeling of use?

1. The lanyard is convenient for the storage of the konjac cleansing puff, which is conducive to all-around ventilation and ventilation and ensures the service life of the konjac cleansing puff.
2. During use, you can put the lanyard on your hand to avoid contact with the skin.